Set Selector

• 3. Move selector shaft of internal shift lever in transmission all the way left to stop while in neutral position.
  
  ("Right" or "Left" is in direction of travel)
• 4. With transmission in neutral, move the gearshift lever to the right to stop.
• 5. Tighten hex bolt of clamp to 2.5 mkp (18 lbs/ft). (Insert serrated washer under the hex nut).
• 6. Check adjustment by shifting all gears. Also check play in the gearshift linkage.
  
  (Gearshift level play should be the same in all gears in all directions).