Removing and Installing Intake Duct

Remove

1. Remove carburetor.
2. Remove spark plug connectors from spark plugs.
3. Remove side cover plate.
4. Remove retaining nuts and bolt from intake duct and withdraw duct.
5. Cover intake port in cylinder head.

Installation

1. Use new intake duct gasket. Make sure that the gasket matches the contours of the intake port in cylinder head.
2. Place the graphite-coated side of the gasket towards the cylinder head.
3. Inspect intake duct for cracks.
4. Carefully and evenly tighten the intake duct retaining nuts and bolt.
5. Install new gasket between duct and carburetor .