Removing and Installing Carburetor
Removal
- Unsnap air cleaner fasteners.
- Remove air cleaner.
- Remove air cleaner base plate.
- Detach carburetor linkage from throttle arm.
- Detach fuel line.
- Remove four carburetor retaining nuts from carburetor flange.
- Withdraw carburetor.
- Cover intake duct.
Installation
Install in reversed order of the above, making sure that the gaskets
seat well and the linkage does not bind.
Changing Air Cleaner Cartridge (KNECHT -Filter)
- Remove center screw from filter housing top and pull out.
- Withdraw filter housing top by pulling up.
- Replace cartridge.
Reassembly
Inspect square plastic foam gasket, replace if necessary.
|
