Install Timing Gear Cover
- 14. Install camshaft end plug, seal with gasket compound.
- 15. Secure valve lifters with P 49 retaining springs.
- 16. Apply a thin, uniform coat of gasket compound to crankcase mating
surfaces, Make absolutely certain that no gasket compound enters oil
galleries of crankshaft and camshaft bearings.
- 17. Join crankcase halves.
- 18. Install o-rings and beveled washers fitted under cap nuts;
position the washers so that the inside bevel faces the crankcase to
accommodate the o-rings, Tighten cap nuts to 4 mkp (29 lbs/ ft),
- 19. Tighten crankcase retaining nuts at camshaft end (flywheel side).
- 20. Install timing gear cover.
- 21. Tighten remaining crankcase retaining bolts to 3 mkp (21. 7 lbs/ft).
- 22. Tighten timing gear cover retaining nuts to 2 mkp (14. 5 lbs/ft).
- 23. Install new oil seal at Bearing 4 in timing gear cover,
- 24. Turn crankshaft to check for free rotation.
- 25. Install fuel pump insulating flange and fuel pump.
|
