Separate the Case
- 14. Remove crankcase retaining nuts.
- 15. Remove crankcase retaining nuts at camshaft end (flywheel side).
- 16. Withdraw right crankcase half using a rubber mallet if
necessary. Do not pry with sharp tools, such as a screw driver, as
this could damage the mating surfaces.
- 17. Remove valve lifters.
- 18. Withdraw camshaft and crankshaft.
- 19. Remove camshaft end cap.
- 20. Remove crankshaft oil seal at Bearing 1.
- 21. Withdraw Bearing 2 and 3.
|
