Oil Filter Housing Bracket

• Remove the oil line going into the side of the oil filter housing.
• Remove the strap that ties the housing to the shroud. You should be able to push the filter housing out of the way to complete the generator exchange.
• Remove the right-most bolt holing the bracket for the oil filter housing. This bolt goes clear through the shroud so you'll have to work with one hand and a wrench over the top or around the side. Now you'll appreciate having removed the air cleaners to gain better access t the back of the shroud.
• When you pull out the bolt, parts may fall off landing where you hope you can find them again.
• Loosen the other bolt on the bracket so it can be rotated out of the way.