|
Visor Repair
|
A pin slips into each end of the visor. One end has a large diameter
pin and the other end is smaller. The larger diameter version is
clamped to provide an adjustable tension to hold the visor in a fixed
position.
In my case the plastic carrier for the larger diamter pin had cracked
and expanded over the years, possibly because it had frozen in the
visor and when the visor was mover, it broke the plastic
carrier. Whatever the reason, I filled the crack and inside of the
hole with an epoxy and replaced the pin, letting the epoxy harden.
|
|
The hole in the visor is for the screw that tightens the clamp around
the pin on the mounting hardware.
|
Last modified: Sat, 17 Apr 2004
Links
|
