912 Manual Replace Hoses, Ducts and Gates
Air Hose Connecting Duct
Removal
| Detach heating hose.
|
| Show how to disconnect the Euro hoses.
|
Installation
| How to adjust the Euro Hose Installation
|
Installation
Installing Lower Duct with Air Gates
This is for the export heater. The following points should be
observed when installing the lower air duct:
| The air gates, located in the lower air duct must be so adjusted that
they perform the opening and closing functions in unison. Ensure that
the large air gate flaps are positioned approx 10 mm (2/5in.) from the
bottom of the ducts when the small air gate flap is fully closed. Upon
mounting the lower ducts at the engine, check for proper functioning
of the air gates and readjust if necessary.
|
Installing Air Gate Assembly
The following points should be observed when installing the air gate
assembly:
| Check for proper seating of the 2,5 mm-thick cork gasket.
Check heating hose attachment for air-tightness and firm seating with
the help of the hose clamp.
|
Last modified: Mon, 17 Jan 2005
Links
|
