912 Manual Cooling System Removal

Cooling System Remove

The cooling air shroud guides the cooling air to the cooling points. It is important to accomplish the assembly with care. The shrouds have to be installed in such way that no open areas or slits are created since loss of cooling air would considerably reduce the efficiency of the cooling system.

	The engine cooling system here.
	Remove aircleaners and hoses.
	Remove the breather hose...
	Euro heating hose removal.
	Remove shields.
	Remove mufflers.
	Disconnect distributor.
	Remove carburetors and v-belt.
	Detach oil lines.
	Remove distributor and fuel pump.
	Remove carrier supports.
	Remove the generator strap and withdraw the blower housing.
	Remove crankshaft pulley and pulley shield.

Cooling System Replace

The cooling air shroud should be reinstalled in reversed order of the above, making certain that the shrouds are well fitted and the spark plug rubber covers properly seated. Torn, porous, or otherwise defective rubber gaskets must be replaced, A 11 rubber parts should be kept free of grease and oil.

Care must be taken in replacing the deflector baffles.

Last modified: Mon, 17 Jan 2005

Links

Inventory - Topic Pages - Brakes - Electrical - Engine - Events - Gallery - Interior - Maintenance - Racing - Restoration - Rust Repair - Suspension - Wheels & Tires - Rust research - Recommendations - Porsche Models

Site Details. Disclaimer. Comments? Questions? Dave Hillman
Content attribted to others remains their property. Otherwise the text and images are licensed under a Creative Commons License.