Dismantling and Reassembling Generator
Dismantling
- Detach V-belt pulley and cooling fan.
- Undo field coil connection from brush holder of positive brush.
- Undo both generator housing bolts.
- Take generator housing apart and extract armature.
- Pull out ball bearings, After dismantling individual parts wash
carefully in petrol and blow through with compressed air.
Reassembling
Reassembly should be effected in the reverse order observing the following points:
- Check armature, field coils, cable connections and brushes,
- Check ball bearings for wear and damage and replace if
necessary. Wash bearings carefully in petrol and pack with Bosch
grease Ft 1 V 33.
- Ensure correct connection of leads to brush holders,
|
