Install Oil Seal

• 1. Inspect timing gear cover for absence of damage.
• 2. Inspect Bearing 4 seating bore in timing gear cover.
• 3. Turn set screw of Bearing 4 until the tip of the screw projects approx. 1 mm into the bearing seating bore in timing gear cover.
• 4. Heat timing gear cover to approx. 160 deg C (320 deg F) and install Bearing 4 using special tool P 27a.
• 5. Tighten the bearing set screw; make sure that the screw is not too long, such as to exert pressure upon the bearing.
• 6. Insert oil deflector.
• 7. Install oil seal using P 73 installer.